Description
The machine is used mainly for producing different sizes of stainless steel round pipe, square pipe, and rectangular pipe.
Application: Industry, construction, furniture, medical use, etc.
Specification
Model |
Production Range
m/m O.D |
Shaft
m/m |
Motor HP |
Production
Speed |
Tolerance
m/m |
YTS1 |
114.3-216.3 |
Φ100 |
DC75*2
VS150 |
0.3-1.5M/min |
± 0.05 |
YTS2 |
76.2-114.3 |
Φ80 |
DC60*2
VS120 |
2-4M/min |
± 0.05 |
YTS3 |
50.8-76.2 |
Φ60 |
DC50*2
VS100 |
2-6M/min |
± 0.05 |
YTS4 |
38.1-50.8 |
Φ50 |
DC30*2
VS60 |
3-8M/min |
± 0.05 |
YTS5 |
25.4-31.8 |
Φ40 |
DC20*2
VS40 |
4-10M/min |
± 0.05 |
YTS6 |
9.5-22.2 |
Φ35 |
DC15*2
VS30 |
6-15M/min |
± 0.05 |
YTS7 |
4.3-12.7 |
Φ30 |
DC10*2
VS20 |
6-15M/min |
± 0.05 |
Special Feature
a. Our machines are manufactured from finest materials. Steady, durable and long life.
b. Automatic control, easy to operate.
c. Easy to replace the molds, save working hour and increase efficiency.
d. Low noise.
Production Flow Chart
First, the coil is set onto the uncoiler, and the steel belt is loosened and rolled into the storage cage, before being transported into the forming machine.
The steel belt is first flattened out, and is processed through rollers to squeeze it to the desired pipe diameter.
The machine then welds, straightens and cuts the pipe to the length set in the automated cut-off machine, and transports the finished pipe to the run out table, where quality inspection can be performed.
Stainless Steel Pipe Production Flow Chart
Stainless Steel Pipe Welding Description
|
|
Fornt of Forming Section |
Welding Mark Griding |
| |
|
|
|
Cut Off Machine |
Product Run Out Table |
|
